SeaLect Tru Course Kayak Rudder Rigging Kit

Everything needed to rig your Tru Course Rudder to operate with Rudder Control Kayak Footbraces on most kayaks. Here is what is included in the rigging kit: 2 x CABLE GUIDE TUBING - 15' 2 x CABLE 1/16 7X7 STAINLESS - 15' 1 x 3/16 INCH...

Sea-Lect Kayak Paddle Snap Buttons

Replacement button for take-apart paddles and other similar applications.Be sure to select proper size (button diameter). PartAK7374205/16"K7374503/8"

Sealect Deck Bungee Kit

the photo above shows contents of kit Add or replace kayak rigging for securing needed items when on the water. (see installation video below) Kit Includes: (1) 11' Deck Bungee, (6) Nylon Pad Eyes, (1) Mounting Hardware Pack & Easy Install...

Sea-Lect Shock Cord Clips

Injection Molded Nylon Make your own bungee cords or other shock cord applications. Simply thread an end through the hole in the base and tie a knot (see illustration at left) In spite of the measurements, the 1/4" clips work best with...

Sealect Recreational Kayak Hatches

A lower cost alternative kayak hatch cover RECREATIONAL HATCH LINE: These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to...

Sealect Heavy Duty Double Hole Lashing Hook

These heavy duty injection molded Nylon hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear.PartABCDEK6714157/8"5/8"15/16"1-3/16"9/16"

SeaLect Nylon Pop-Rivet Mount Pad Eye

K081350A3/8in.B1/2 in.C1-3/8 in.Weight.01 lb.

Sea-Lect Utility Paddle Leash

The SEA-LECT Designs utility paddle leash will keep your mind at ease while you reel in your tournament clinching fish by keeping your focus on landing that lunker and not managing your paddle. Comes with leash and paddle strap...

Sealect Paddle & Pole Keeper Kit

kit contains all the parts shown above Store your paddle or pole while on the water using the newest kit offering from SEA-LECT Designs. (see installation video below) Kit Includes: (2) 18" Keeper Bungees, (4) Bungee Terminal Ends w/ Sleeves,...

Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar

Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE    

SeaLect Rudder/Footbrace/Rigging Combo Kit

If you are planning to add rudder control to your kayak, and you need both the SeaLect rudder control footbraces and a TruCourse rudder, you should consider buying them both along with the rigging kit and saving some money. Here is what you get in the...

Sea-Lect Kayak Paddle Clip

One piece paddle clip allows for the simple one handed storage of your paddle, anti snag ramps prevent line getting stuck under the clip when not in use, and leash attachment points for securing a paddle leash.Part #ABFastenerK7373611-1/8"4"1/4" OH

Sealect Kayak Footbrace Height Adjusters (pair)

In cases where your foot peg makes contact with the underside of your deck, use a pair of Kayak Footbrace Height Adjusters to move the mounting location down without the need to drill new mounting holes through your boat. Includes one pair of Height...

Sea-Lect Nylon Lashing Hooks

Injection molded Nylon Two Hole: Part A B C D E Fastener SD-671421 7/8" 3/8" 1/2" 3/4" 5/8" #6RH One Hole: Part A B C D Fastener SD-671425 15/16" 7/16" 7/16" 5/8" #6RH

Sea-Lect Kayak Shock Cord Deck Fittings

Injection Molded Polypropylene Fiberglass/Nylon These parts are used to manage shock cord on the decks of kayaks.Dimensions and specifics below Round Line Guide - K736530 A= 1.5" - B= 3/8"   Bungy Block -...

Sealect Footbrace converter kit

used to convert standard footbraces to rudder control. Includes tension adjusters.  

SeaLect Rudder Control Foot Braces

SEA-DOG's new pivoting pedal foot brace system is designed with the same strength and stiffness as our adjustable foot brace version, which has been an industry standard retro-fit for years. By using the same track, adjustment rods and clamps it is now...

SeaLect Stainless Pop-Rivet Mount Pad Eye

The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.316 Stainless Steel K081850A11/32 in.B11/32 in.C1-1/16 in.Fastener3/16" Pop RivetWeight.02 lb.

SeaLect Kayak Rudder Cable Tubing

Black Nylon rudder cable tubing. 3/16" OD. This is the same material used in the SeaLect Rigging Kit - which has 2 - 15 foot pieces. If you need more than that you can order it by the foot. Typically used with 1/16" Stainless cable.  

SeaLect Stainless Hammock Hooks

These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example. Part A B C D E SD-671460 15/16" 3/4" 1/2" 1-1/4" 1/2"

SeaLect Kayak Foot Braces

These are absolutely the best kayak footbraces we have ever seen. They are resistant to any of the things you might run into including water, sand, fish scales, sunlight - nothing will stop these footbraces from working properly. The pedal is molded...

SeaLect Kayak Recreational Foot Braces

SEA-LECT Designs Kayak Recreational Footbraces are designed to be maintenance free with tremendous strength - at a price that's attractive to everyone! With three attachment options and low profile pedal that mounts easily in most boats, this footbrace...

Sealect Performance Kayak Hatches

For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum...

Sealect Stud Mount Kit

When you don't want to mount your footbraces by drilling a hole through your kayak, simply fiberglass or glue on studs to act as the mounting bracket. This kit includes four studs, four clamps, four nylock nuts and two cable adjuster clamps. This kit...

Tension Adjusters for Rudder Control Footbraces (pair)

Tension Adjuster (circled) K747260 If you own a pair Sea-Lect Rudder Control Foot Braces but somehow did not get the tension adjusters that we provide or if they have been damaged somehow, these are OEM replacements.  

1/4" Shock Cord Hook Ends

Injection Molded Acetal Make your own bungie cords or creat elastic tie-downs for your boat - lots of uses for these easy to install and neat looking hooks that won't ever rust. 1/4" shock cord only. Part# A B C Cord...

Sea-Lect TruCourse Rudder

For replacement blade click HERE. SEA-LECT Designs puts its engineering innovations to work with its radical new kayak rudder, which sports a unique combination of practical and high-performance features. What sets SEA-LECT Designs' rudder...

Kayak Rudder Mounting Gudgeons

If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different...

Sealect Anchor Trolley Kit

Position your anchor, drift chute or stake out pole from bow to stern to adjust for current or wind. Using a simple pulley system with zig zag cleat lock, you can finally angle your boat in any direction you desire, and put yourself in position to...

Sea-Lect Single and Double Loop Deck Fittings

For kayak deck applications especially for arranging bungy cords to retain gear. K736550 - Single Loop K736560 - Double Loop Part A B Fastener K736550 1-1/4" 1/2" #10 OH K736560 1-5/8" 1/2" #10 OH

SeaLect Kayak Manual Bilge Pump

Essential safety equipment, this high quality pump is great for Kayaks, and all small boats with sides less than 16 inches high. Part# A SPG GPM K737500 21" 10 6

Sea-Lect Webbing Handles w/caps

Molded Nylon/Webbing Outfit your kayak with the SEA-LECT Designs Webbing Handle w/ Caps made from heavy duty webbing with a rubber cover; Remember...a wet and slippery kayak is much easier to handle, with a handle! ...

Sealect Pull-up Strap Handle Kit

kit contains all the items shown aboveEver have trouble getting out of your boat when you pull up to the beach? Are you a kayak fisherman looking to stand up on your sit-on-top to get the perfect angle? If so … boy do we have a solution for you!...

SeaLect Kayak Recreational Rudder Control Foot Braces

SEA-LECT Designs Kayak Recreational Footbraces are designed to be maintenance free with tremendous strength - at a price that's attractive to everyone! With low profile pedal it mounts easily in most boats. This footbrace system is a dream for boat...

Sea-Lect Folding Paddle Clips

Secure your paddle or other round items These injection molded, folding clips could be used for all kinds of gear. They have a nice detent when they fold down so that they stay down. Although these clips look somewhat delicate, they are quite robust. If...

Sealect Double Paddle Drip Rings

These are exactly the same drip rings that the last double paddle you bought had. So if you lost or wore out those or you made a new paddle and need drip cups for it, here is your chance. Fits handles from 1-1/8" up.Part #ABWeightK7372901"7/16".20

SeaLect HDPE Drain Tube

This drain tube consists of two pieces, a tube with a flange on one end and another end piece with a flange. The end piece fits over the tube with a friction fit. The tube can be cut off to accommodate any thicknesss from 3/4 to 2-1/2 inches.Designed to...

SeaLect Tapered Scupper Plug

This stopper is designed for use with the SeaLect HDPE drain tube. Cat No. A B C D K520113 15/16" 3/4" 1" 2-1/2"