Rigging & Mounting

  • 5/8" Stainless Sail Slides

    5/8" Stainless Sail Slides

    The strong reliable standard for external sail tracks. Attach with stainless shackles or lace them on. Fits 5/8" external sail track. You may want to use our sailmaker's D-shackles rather than lace or stitch these slides to your sail.

    $2.60
    Add to Cart
  • Boom Bails and Hangers

    Boom Bails and Hangers

    Lots of different sizes RL-333 Racelite Stainless boom bail is 1-1/8" wide but could be bent down to 1" or up to 1-1/2". Strap is 1/2" wide and .062" thick. Holes are 3/16"...

    $2.99 - $16.11
    Choose Options
  • Forestay Tensioning Lever

    Forestay Tensioning Lever

    Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many trailerable sailboats up to around 26-feet. These are...

    $62.00
    Add to Cart
  • Heavy Duty, Stainless Thimbles

    Heavy Duty, Stainless Thimbles

    Stamped 304 Stainless Heavy duty stamped 304 stainless steel thimbles. The smaller sizes are used to relieve wire rope where it goes around clevises, tangs, chainplates, etc. The larger sizes are typically used with rope such as on anchor lines where...

    $0.72 - $8.78
    Choose Options
  • Potter 15 End Boom Sheeting System

    Potter 15 End Boom Sheeting System

    This simple but effective system allows the Potter 15 to be sheeted entirely from the end of the boom, keeping the cockpit clear and the sheet right at hand. Package includes performance Ronstan blocks (one for boom and one for the traveler), and a...

    $224.95
    Add to Cart
  • Pulpit Anchor

    Pulpit Anchor

    C.S. Johnson Pulpit Anchor. Lots of potential uses for these stainless fittings that slip around and affix on 1" tubing of rails or pulpits, providing a ½" hole to which you can attach a block, lifeline jaw fittings, etc. This piece is a standard part...

    $12.00
    Add to Cart
  • Racelite 1/2" Stainless Tangs

    Racelite 1/2" Stainless Tangs

    Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.

    $1.61 - $2.92
    Choose Options
  • Racelite 3/4" Stainless Tangs

    Racelite 3/4" Stainless Tangs

    These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.

    $1.95 - $3.54
    Choose Options
  • Racelite Adjustable Track Eye Slide

    Racelite Adjustable Track Eye Slide

    For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

    $11.87
    Add to Cart
  • Racelite Chain Plate Covers

    Racelite Chain Plate Covers

    Stainless SteelPart #OverallSlotThicknessMtg HoleRL-344-B2" x 1"1.04" x 0.135"0.060"0.165"RL-4453" x 1.25"2.070" x 0.250"0.090"0.165"RL-4203.5" x 0.878"2.070" x 0.250"0.060"0.200"

    $2.74 - $4.47
    Choose Options
  • Racelite Deck Mounted Chain Plate

    Racelite Deck Mounted Chain Plate

    Deck mounted shroud chain plate has 1/4" mounting holes on 1-1/2" centers with one 1/4" clevis pin hole. Constructed of 3/32" thick stainless steel bent to a 65 degree angle.

    $4.08
    Add to Cart
  • Racelite Deck Plate

    Racelite Deck Plate

    This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with clevis pin and ring. wt 1/2 oz.

    $3.82
    Add to Cart
  • Racelite Deck-Plate

    Racelite Deck-Plate

    This stainless steel deck plate can be used with our RL-305-B blocks. Takes #8 RH screws. Base 2-1/2" long. Stainless steel. You may need a 5/8" x 3/16" Clevis Pin

    $2.85
    Add to Cart
  • Racelite Halyard Shackles

    Racelite Halyard Shackles

    Stainless Steel Light, fast, positive. No cotter pins, New spring tension captive pin maintains steady pressure on sides of shackle undersailing conditions, and allows easier opening for quick release. Stainless steel spring.

    $6.30 - $7.69
    Choose Options
  • Racelite Small Swivel

    Racelite Small Swivel

    Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

    $3.93
    Add to Cart
  • Racelite Stainless Chain Plates

    Racelite Stainless Chain Plates

    Stainless Steel Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel made in the USA by Racelite. Cat No...

    $2.28 - $5.11
    Choose Options
  • Racelite Stainless Deck Straps

    Racelite Stainless Deck Straps

    Stamped Stainless SteelPart No.OpeningWidthLengthFastenersRL-314-A3/8" x 3/8"3/8"3"#8RL-314-B7/16" x 7/16"1/2"3-1/2"#8RL-314-C5/8" x 5/8"1/2"3-7/8"#8

    $2.16 - $2.85
    Choose Options
  • Racelite Stainless Eyes

    Racelite Stainless Eyes

    Stamped Stainless Steel Stamped stainless eyes. Both eyes made from 0.075" strap. Part Length Width Eye Width Hole dia. RL-311 2-1/4" 1/2" 3/4" 3/16" RL-313 1-1/2" 3/8" 3/8" 3/16"

    $1.95 - $2.50
    Choose Options
  • Racelite Stainless Mast Hounds

    Racelite Stainless Mast Hounds

    RL-425-H - RL-325-H Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid. Part No. Mast Size Strap Hole...

    $8.83 - $9.49
    Choose Options
  • Racelite Stainless Shroud Adjusters

    Racelite Stainless Shroud Adjusters

    Stainless steel - two sizes For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings. Dimensions: Part Length Width Hole dia. Strap thickness RL-245S 5-1/2" 5/8" 0.264" 0...

    $7.89 - $8.73
    Choose Options
  • Racelite Stainless Spin Strap

    Racelite Stainless Spin Strap

    The RL-318 Spin Strap from Racelite is used to connect a block to a spar or just about anywhere else. Use with block RL-305-A or RL-205. Takes #10 screws. Weighs 1/3 oz. Here it is used to attach an RL-205 to the top of the mast on our Ladybug sailboat.

    $2.78
    Add to Cart
  • Racelite Vang Plates

    Racelite Vang Plates

    Stainless SteelThe stainless plates are 1-1/2" x 3" x 0.062" with 3/16" mounting holes. The curved ones are intended for a boom that is 2-3 inches in diameter.The stainless cables are 1/8" diameter x 6" long. The diameter of the button is 5/16"

    $3.15 - $6.31
    Choose Options
  • Ronstan 1/4" Tang

    Ronstan 1/4" Tang

    6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing holeUsed for terminating wire riggingGrade 316 stainless steel0.7 oz. - 20 g

    $14.41
    Add to Cart
  • Ronstan 3/16" Tang

    Ronstan 3/16" Tang

    5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing holesUsed for terminating wire riggingGrade 316 stainless steel0.5 oz. - 15 g

    $19.43
    Add to Cart
  • Ronstan 5/16" Tang

    Ronstan 5/16" Tang

    8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing holeUsed for terminating wire riggingGrade 316 stainless steel1.4 oz. - 40 g

    $19.51
    Add to Cart
  • Ronstan Brace Hook

    Ronstan Brace Hook

    Brace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Stainless steel hookNeoprene pad

    $17.75
    Add to Cart
  • Ronstan Closed Thimbles

    Ronstan Closed Thimbles

    Make eyes in rope or wire ropeRonstan ThimblesCable Ø1/8"1/4 in.A11/32"13/16 in.B3/16"11/32 in.C5/8"1 5/16 in.Weight0.1 oz.0.7 oz.

    $6.95 - $8.50
    Choose Options
  • Ronstan Eye/Eye Ball Bearing Barrel Swivel

    Ronstan Eye/Eye Ball Bearing Barrel Swivel

    Ball bearing swivels like this one have lower friction and higher working loads than non ball bearing versions. Used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high speed rotating...

    $59.41
    Add to Cart
  • Ronstan Mast Hound

    Ronstan Mast Hound

    Suits mast dia.s between 76mm-115mm (3"-4 1/2") 316 Stainless Used for terminating wire rigging Wt. 3.9oz - 110g

    $28.86
    Add to Cart
  • Ronstan S-Hooks

    Ronstan S-Hooks

    316 Stainless Reference RF48A RF49 A 13/32 in. 13/32 in. B 13/32 in. 7/16 in. C 2-17/32 in. 2-15/16 in...

    $5.91 - $8.59
    Choose Options
  • Ronstan Swivel Cleat Base

    Ronstan Swivel Cleat Base

    Alloy cleating arms Grade 316 stainless steel fittings Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and...

    $62.93
    Add to Cart
  • Rubbaweld Rigging Tape

    Rubbaweld Rigging Tape

    Clevis pins and rings can get hooked on line or otherwise pulled out and consequences can be disastrous. On stayed rigging we suggest wrapping your turnbuckles and other pinned fittings to make sure they don't get snagged or wiggle lose—especially if...

    $15.00
    Add to Cart
  • Seadog Closed, Stainless Thimbles

    Seadog Closed, Stainless Thimbles

    Cast 304 Stainless Heavy duty stamped 304 stainless steel thimbles. These can be used for wire rope and are especially recommended for use with 12 strand Spectra line.For more sizes of these thimbles from Ronstan, click HERE Part...

    $1.25 - $1.44
    Choose Options
  • Seadog Forged Brass Pad Eyes

    Seadog Forged Brass Pad Eyes

    These Pad Eyes are great for block attachment, controlling lead lines, or creating tie down points. Constructed forged brass wire. Installs with two FH fasteners (not included). Part # A B C Fastner SD-081270 5/16" 3/8" 1-3/8" #8...

    $2.35 - $2.99
    Choose Options
  • Seadog Jaw & Jaw Turnbuckles

    Seadog Jaw & Jaw Turnbuckles

    Machined 316 Stainless Each Sea-Dog Stainless Turnbuckle is made from AISI 316 stainless steel and features an electropolished bright finish at no additional cost. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable...

    $28.57 - $37.16
    Choose Options
  • Seadog Sailmaker's D-Shackles

    Seadog Sailmaker's D-Shackles

    Stamped 304 Stainless - Made in Denmark These shackles have many potential uses but their primary function is for use attaching sail slugs and slides to grommets. Part No. A B C Breaking Strength SD-140154 3/16" 1/2" 1-1/16" 2,640 lbs...

    $2.67 - $5.26
    Choose Options
  • Seadog Stainless D-Shackles

    Seadog Stainless D-Shackles

    Note: size = pin diameter Above SD-147110 - SD-147108 - SD-147106 - SD-147104 - SD-147103 Forged 316 Stainless Part No. A B C BreakingStrength SD-147103 5/32" 3/8" 11/16" 1,540 lb. SD-147104 3/16" 7/16" 11/16" 2,200...

    $3.42 - $9.22
    Choose Options
  • Seadog Stainless Long D-Shackles

    Seadog Stainless Long D-Shackles

    Note: size = pin diameter Forged 316 Stainless Part No. A B C BreakingStrength SD-147173 5/32" 5/16" 1-5/16" 1,540 lb. SD-147174 3/16" 7/16" 1-9/16" 2,200 lb. SD-147176 1/4" 1/2" 1-7/8" 3,300 lb.  

    $4.75 - $6.75
    Choose Options
  • Seadog Stainless Twisted Shackles

    Seadog Stainless Twisted Shackles

    Note: size = pin diameter Forged 316 Stainless Part No. A B C Breaking Strength SD-147403 5/32" 5/16" 1-1/4" 1540 lbs SD-147404 3/16" 3/8" 1" 2,200 lbs SD-147406 1/4" 1/2" 1-1/4" 3,300...

    $2.97 - $7.67
    Choose Options
  • Small 7 Hole Quick-Release Shroud Levers

    Small 7 Hole Quick-Release Shroud Levers

    Adjust and tension dinghy rigging with the ease of a lever. C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for storage or to unstep the mast. 7 positions allow for micro...

    $37.50
    Add to Cart