Cleats

A very strong alloy cleat. Available in standard silver stove enamel finish   A Rope Size Finish Fastener Weight Std. Pack Fastener 002111 3-1/4" 2-5/8" 11/16" 1/8"-1/4" Silver #10 FH

A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for...

Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32"

Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without...

A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it enters the cleat...

Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws.

Cast Aluminum Aluminum tie-down cleats have a smoother finish than the iron, and are lighter if weight is a consideration Available in 4", 5", & 6" sizes  

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic...

Aluminum/Nylon/Acetal A neat, compact alloy cleat. Manufactured from aluminium for light weight and durable performance. SD-002112 Mk2 has a silver stove enamel finish for a cost effective, high quality coating. Patented Keeper diverts the rope away from...

This Aluminum cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines, for light...

These economical yet durable camcleats from Race-Lite are just the thing for quick set and release of sheets and other lines on your sailboat. They are also handy for other jobs where precise adjustment of rope or line is needed. See also RL-261, and...

These die cast chrome plated cleats are interchangeable with Perko® style 1210 cleats. Complete w/ galvanized studs, washers and nuts threaded into each leg of the cleat. This eliminates the need for fasteners and provides a clean looking installation...