Hardware

These are genuine bronze oarlock sockets. They are sand cast by Buck Algonquin. They should be used with Bronze oarlocks. Specifications Finish Cast Material Bronze Flange Width 1-1/8 in Flange Length 3-1/4 in Length Under Flange 1-1/4...

Adjust and tension dinghy rigging with the ease of a lever. C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for storage or to unstep the mast. 7 positions allow for micro...

These economical yet durable camcleats from Race-Lite are just the thing for quick set and release of sheets and other lines on your sailboat. They are also handy for other jobs where precise adjustment of rope or line is needed. See also RL-261, and...

Heavy duty black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4.5, & 6.25" sizes

Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.

The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.316 Stainless Steel K081850A11/32 in.B11/32 in.C1-1/16 in.Fastener3/16" Pop RivetWeight.02 lb.

These are genuine bronze oarlock sockets. They are sand cast by Buck Algonquin. They should be used with Bronze oarlocks. Specifications Material Bronze Overall Width 4 in. Overall Height 1-1/4 in. Hole ID 1/2 in. C. S. Screw...

For fastening to aft cockpit bulkhead. Opening 2-3/4" x 3/4". Takes # 8RH screws.

6 Colors - 6 Shapes - Many Uses Cylinder - This is a good shape for a parrel, not traditional, but I can't see why it would not work just fine. Cube - Obviously this bead will NOT work! But it may have other uses. Let me know...

Investment Cast 316 Stainless Steel. Part Number A B C SD-146131 3-5/16" 7/16" 3/4"

These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline...

Black Nylon rudder cable tubing. 3/16" OD. This is the same material used in the SeaLect Rigging Kit - which has 2 - 15 foot pieces. If you need more than that you can order it by the foot. Typically used with 1/16" Stainless cable.