Hardware

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 21mm / 7/8" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg / 220 lbs

This is the factory West Wight Potter 15 and 19 gooseneck. It does not include any boom pieces, just what it pictured.

These Black Aluminum Pop rivets work in a standard pop-rivet gun. These are perfect for attaching Padeyes and other hardware to plastic kayaks or any surface where you are unable to reach the back side.Each rivet is split into three sections which bend...

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

These heavy duty injection molded Nylon hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear.PartABCDEK6714157/8"5/8"15/16"1-3/16"9/16"

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines Impact resistant, U.V. stablised Nylon Reference Imperial Metric Hole Ø 9/32 in. 7 mm Fastener Ø 5/32 in. 4...

More of a courtesy light than anything. This little LED lights amber and uses an incredibly small abount of electricity. Hook directly to 12 volt source to light the cabin of your little cruiser.  

These are the bottom hinges that screw directly into a coaming or deck to mount a bimini. The photo above shows the difference between top mount and side mount and how the end caps or inserts mount on the hinges.

1 x 4-piece-pole 1 x Magnet holder 1 x Navimount Vertical / 950 1 x Navimount Horizontal / 952 1 x Neoprene stowaway bag Size incl. neoprene stowaway bag: H = 36 mm, Dia. = 80 mm Weight (incl. neoprene stowaway bag): 550 g

RL-427 - slides on 7/8" sailtrack and has a thumbscrew to stop travel.Shown with boom furler option

Brace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Stainless steel hookNeoprene pad

This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The rudder gudgeons are made from 1" wide strap and are 3/32 (0.090)" thick. The...