Satellite City -Instant Glue

Hot Stuff Original is our thin CA glue with a viscosity (3cps) similar to water and no surface tension. When you have parts that fit exactly together, first get them in position, then run this instant glue along the crack, and it will wick right in. If you have tight-fitting joints of non-porous material, Hot Stuff thin CA glue will give you the best results as it will not create any extra space between the pieces, and since you get the parts aligned before applying this instant glue, you can be sure they will be perfectly in place when the glue cures.

Curing time is five seconds between tightly fitting, non-porous parts. We recommend using the NCF Quick CA glue accelerator to ensure a complete cure of the bond. Store unopened bottles in the freezer to extend shelf life. Bottles of super glue (any brand) which have been opened will experience a shorter shelf life if they are continually taken out of and put back into cold storage. SDS click here

Super T MEDIUM gap-filling CA glue has a viscosity (200-300 cps), similar to syrup. This super glue is perfect for gluing somewhat porous materials and pieces which have small gaps between them. Super T instant glue cures at a slower speed (10-25 seconds) than Hot Stuff. You can bond wood, metal, rubber, nitrile, composites like carbon fiber and Kevlar, many types of plastics, and more. To bond two parts together, apply the Super T CA glue to one part and accelerator to the other part, then push together and hold tightly for around 30 seconds. SDS click here

Special T THICK gap-filling CA glue (green label) has a viscosity (1150-1500) similar to honey. This super glue works great when you use it to bond both porous and non-porous parts, and it can fill larger gaps than our Super T medium CA glue. It is best used to glue parts that are missing pieces or don’t fit very well together. You can bond the same materials as with our other CA glue- wood, metal rubber, nitrile, composites, many types of plastics- and Special T is effective even when a poor fit makes parts look impossible to bond. The gap-filling capability is very useful when there is a large chunk missing from a surface- filling that space with Special T can preserve the structural integrity, seal the area from moisture and contaminants, bond something to the exterior that would not fit otherwise, cover and protect jagged edges, and improve the look of the surface. SDS click here

NCF Quick Accelerator is the best you will find anywhere. All of our accelerators dramatically decrease the curing time of the glue and force the glue to cure when it wouldn't otherwise, but NCF Quick is less expensive per ounce, has a more pleasant odor than the others, and comes in a convenient 6oz aerosol can for easy application. This accelerator is active for several minutes, so you can spray several pieces at once if you are making multiple bonds.

Apply with a quick push of the button- the accelerator is meant to flash off instantly, so if you are getting the part wet, you are applying too much. NCF Quick is plastic-safe and foam-friendly. SDS click here