Sailboat Hardware

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines Impact resistant, U.V. stablised Nylon Reference Imperial Metric Hole Ø 9/32 in. 7 mm Fastener Ø 5/32 in. 4...

Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round stock. The mounting hole is 1/4" dia. There is a little...

For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

316 Stainless Reference RF48A RF49 A 13/32 in. 13/32 in. B 13/32 in. 7/16 in. C 2-17/32 in. 2-15/16 in...

Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these jaw to jaw swivels are...

Forged, then hot dipped galvanized SD-147804, SD-147806, SD-147808 Part No. Size A B C D Weight SD-147804 3/16" 1/4" 3/8" 9/16" 13/16" .04 lb. SD-147806 1/4" 5/16" 7/16" 3/4" 1-1/16" .07 lb...

Hardwood - Three sizes These wooden beads will work great for parrels of all kinds. The 12mm (roughly 1/2"), 16mm (roughly 5/8") and 18mm (roughly 3/4") dia beads have 5/32" holes. The 25mm (roughly 1") dia beads have 7/32" holes.

Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

These halyard shackles have a lever action for easy opening and closing, with a keyed pin for positive locking.Grade 316 stainless steel bodies and pins ReferenceImperialMetricA3/16 in.4.8 mmB7/8 in.22.0 mmC13/32 in.10.5 mmD19/32 in.15.0 mmP.L. B.L.1980...

RL-336 - Spring TypeStainless Steel spring rudder hold-down - 4" long x 3/4" wide - may be used with any of our pintles and gudgeons. RL-337 - Swivel TypeStainless Steel swivel hold-down - 1" long x 5/8" wide - may be used with any of our pintles and...

Note: size = pin diameter Forged 316 Stainless Part No. A B C Breaking Strength SD-147403 5/32" 5/16" 1-1/4" 1540 lbs SD-147404 3/16" 3/8" 1" 2,200 lbs SD-147406 1/4" 1/2" 1-1/4" 3,300...

Use with RL-301-A or RL-301-B or RL-305-A or RL-305-B blocks. Takes #10 screws. Weight 1/3 oz.