Sailboat Hardware
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Racelite Stainless Deck Straps
$2.16 - $2.85Stamped Stainless SteelPart No.OpeningWidthLengthFastenersRL-314-A3/8" x 3/8"3/8"3"#8RL-314-B7/16" x 7/16"1/2"3-1/2"#8RL-314-C5/8" x 5/8"1/2"3-7/8"#8$2.16 - $2.85 -
Factory West Wight Potter 19 Mast Step with pins
$119.00This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well. Some dimensions: Aluminum part that goes inside the...$119.00 -
Rubbaweld Rigging Tape
$16.00Clevis pins and rings can get hooked on line or otherwise pulled out and consequences can be disastrous. On stayed rigging we suggest wrapping your turnbuckles and other pinned fittings to make sure they don't get snagged or wiggle loseâespecially if...$16.00 -
Seadog Stainless Steel Cleats
$20.00 - $25.00Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the 6" SeaDog Stainless Cleat for its 15 & 19 foot...$20.00 - $25.00 -
Racelite Medium Duty Pintles
$10.993/8" pins - 3/4" - 1-1-4" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 3/4" or 1-1/4" thick rudder. (note: pintle tangs can be easily adjusted for...$10.99 -
Nylon Sheaves with SS Bushings
$2.59 - $3.49Injection molded nylon If you have read some of the articles in Duckworks about making your own Blocks (see links below), and want to try it, but are uncertain about making the sheaves, this may be what you need. These durable Nylon pulleys are also...$2.59 - $3.49 -
Racelite Deck-Plate
$2.85This stainless steel deck plate can be used with our RL-305-B blocks. Takes #8 RH screws. Base 2-1/2" long. Stainless steel. You may need a 5/8" x 3/16" Clevis Pin$2.85 -
Ronstan Eye/Eye Ball Bearing Barrel Swivel
$67.99Ball bearing swivels like this one have lower friction and higher working loads than non ball bearing versions. Used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high speed rotating...$67.99 -
Racelite 1/2" Stainless Tangs
$1.99 - $6.99Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.$1.99 - $6.99 -
$20.00
-
1/4" (6mm) Ronstan Single, Cheek, Ball Bearing Block 1
$20.99Features: Low friction High static and dynamic load capacity Lightweight Suitable for screw or pop rivet mounting Precision moulded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low...$20.99 -
Ronstan Closed Thimbles
$7.99 - $14.99Make eyes in rope or wire ropeRonstan ThimblesCable Ã1/8"1/4 in.A11/32"13/16 in.B3/16"11/32 in.C5/8"1 5/16 in.Weight0.1 oz.0.7 oz.$7.99 - $14.99