Hardware

Investment Cast 316 Stainless Steel 90° Mount Deck Hinge for mounting biminis. Part # Description Base Pin Fastner SD-270200 90 degree Deck Hinge 3/4" x 2-1/4" 1/4" #10FH

This stainless steel deck plate can be used with our RL-305-B blocks. Takes #8 RH screws. Base 2-1/2" long. Stainless steel. You may need a 5/8" x 3/16" Clevis Pin

These straps (sold as a pair) will work in most bimini applications. The 1" wide nylon strap is plenty strong and the chrome plated clip makes it easy to release straps to fold bimini. Straps are used as in the sketch below (straps are marked with "S"...

Ball bearing swivels like this one have lower friction and higher working loads than non ball bearing versions. Used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high speed rotating...

Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.

West Wight Potter-15 Factory Stem Fitting

Injection Molded Acetal Make your own bungie cords or creat elastic tie-downs for your boat - lots of uses for these easy to install and neat looking hooks that won't ever rust. 1/4" shock cord only. Part# A B C Cord...

If you want to make a bimini out of square tubing, you can use these fittings. Use the regular hinges. The square insert fits 7/8" inside square tubing - 1" x 1" outside tubing dimensions.

Make eyes in rope or wire ropeRonstan ThimblesCable Ø1/8"1/4 in.A11/32"13/16 in.B3/16"11/32 in.C5/8"1 5/16 in.Weight0.1 oz.0.7 oz.

Stamped 304 Stainless Heavy duty stamped 304 stainless steel thimbles. The smaller sizes are used to relieve wire rope where it goes around clevises, tangs, chainplates, etc. The larger sizes are typically used with rope such as on anchor lines where...

3/8" pins - 3 different options These pintles are somewhat adjustable like the Racelite 300 series pintles but heavier. You would probably want to use the narrow pintles with a metal rudder. These have a single pin length option and nominally fit a 7/16"...

If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different...