Open Sailboats 14' up

Mikesboat is a big Piccup Pram. It is slightly narrower in proportion. The idea was to have something like Piccup that was large enough to take the family so she has two bench seats 8' long. It should be a good expedition solo boat with a boom tent...

For study plans click HERE For full digital plans to download, click HERE Navigator has turned out to be the surprise package of the whole bunch, 300 plus sets of plans in today's market is a lot! Navigator was designed for Boat Books Auckland's...

Lenght 7.31m Designer: Paolo Lodigiani and Matteo Costa Round hull, Strip-Planking construction Building Skills: medium For study plans click HERE LOA: 7.313 mbeam: 1.938 mDisp: 1300 kgsail area:Mainsail 18.00 m2jib 9.00 m2 . Hull ROUNDrigs: Marconi...

The 12’4’’ Petite Brise has proven to be very popular and we have had several requests for a longer version, so we have gone for a hull length of 16’ and increased the beam to 5’9’’. Like her smaller sister, we...

The PALOMA, in its various versions, derives from a fruitful collaboration with our clients and, perhaps, also for this reason, it seems to have met the favour of the public. It all started from the request of a client who wanted an inboard motor boat,...

Apparently, "Toshing" was the taking of copper from laid-up warships. We have used the Mevagissey Tosher as the model for this boat. They were renowned for their speed and sea keeping qualities and apart from removing copper they were also used for...

This design is based upon the traditional daysailers and small yachts that can be hired on the Norfolk Broads. Construction is Cedar strip planking over computer faired moulds/jig. The mast is stepped in a tabernacle for easy raising/lowering and she can...

Most East Coast Cobles were of clinker (lapstrake) construction but a few were carvel and the 27’ Northumbrian Coble emulates one of these by using modern strip planked construction. I have not attempted to ‘modernize’ the concept too much and so...

Nootka Sound is a Camping Cruiser. It was an original design for Bob Young of Lake Oswego, Oregon, but generally similar to several earlier designs. Among the requirements were: Light weight for good trailerability with normal family cars; shoal draft;...

The JayCee was conceived with Tyrone Boats as a trainer for the International Canoe. The idea was to produce a craft which was based upon low cost, easy building techniques and which would be an introduction into the world of IC sailing. With all this...

A very simple 18’x 5’2’’ ply sharpie drawn with a simple unstayed sprit boom rig and a ply centreboard. Ideal for estuary cruising and an excellent ‘big’ boat for first time construction. In it’s basic form 10...

The Casco Bay 16 was designed for Maurice Byrne of the Boatyard Upstairs for a Swiss client who wanted a fast, easily handled canoe yawl for use on his home lakes. We have developed an efficient and stable hull form with slight influence from the Casco...