Open Sailboats 14' up

This large daysailer may be built in 2 versions - a fixed keel motorboat with either an inboard engine or outboard in a well, or a sailing version with fixed or lifting keel. Construction is for clinker/ply over computer generated moulds which could also...

Traditional sail boat, 4.5 m long, with outboard motor well, clinker plywood For Ebihen 15 Study Plans, Click HERE Hull length / waterline 4.50 / 4.24 m   Sail area 14 m²   Breadth / waterline 1.85 / 1.64 m   Outboard...

A Stable, unsinkable, row/sail cruiser For V448 Study Plans, click HERE V448 is a rowing-sailing 4.50m modern design with room aboard, many sealed storage spaces for gear, an un-stayed, furling mast with one simple sail. Initially very stable and...

Paul Fisher designed the Kingfisher for Jack Chippendale of Chippendale Craft Ltd as a large roomy dayboat for the family which could be built from a kit or from plans in an average sized garage using only domestic DIY tools. We wanted a boat for...

We designed the 16’ Stornoway for Walt Scherf and having built that boat, he asked me to draw up an 18’ fast dayboat based partly on the Stornoway model but with lower sleeker lines. What has evolved is a hull with 6 planks per side and a very...

The Black Swan is a stretched version of the White Swan for Dr. Carcereri of Verona who wanted good headroom in a small traditional gaff cutter. In fact she has just over 6' in the galley area and an accommodation that can be altered to suit your own...

The Lillie Canoe Yawl - this lovely craft was commissioned by Tom Dunderdale after reading the series of articles in the Classic Boat magazine on the 13' strip planked canoe yawl Ethel. The idea was to produce a canoe yawl of similar style to those of...

This design, for a Dutch client, has 8 planks per side which are simply stitched together edge to edge and finished with epoxy and tape. She may be fitted out in many different ways but the standard drawings show her with a steel centreboard which is...

Click HERE for Phoenix III Study Plans Phoenix III was designed for the builder of the first boat, Paul Hernes. Paul came to me in search of plans for a dinghy which could be sailed fast and far, rowed in such a way as to be more pleasure than pain, and...

For something quite a bit larger Kane and Able are two separate Suffolk Beach punts. Both have the same overall length, beam and arrangement. Kane is built using the clinker ply method and computer faired mould shapes for this are given on the drawings...

If you need printed plans, click HERE   Simple to BuildModern Performance - Sails rings around most "character boats"Light enough to handle on land by yourselfEasy to follow plans - step by step instructions. The Goat Island Skiff is my most...