Kayaks

The Ocean Crossing Kayak is the first stage in an experimental project - some ocean going kayaks are quite large with volume to carry extensive stores and are made from exotic materials to keep weight down - some have 'castles' at bow and stern so that...

Length 5.35mDesigner: Paolo LodigianiChine hull, Stitch & Glue constructionBuilding Skills: amateurThe NAIADE is a two seat NINFA and has similar characteristics. It is not a real double sea kayak, as this would require an extra meter, as well as...

buy Trilars plans to make Larsboat into a trimaran Larsboat was built by Lars Hasselgren to replace a Folboat that had finally met its end. Lars wanted capacity for two, plus decking, as with his old boat. I took Toto and...

The Sealion was originally modelled on our Seafox sea kayak but the use of Cedar Strip planking for her construction allows a more graceful and curvaceous shape both for the hull and the deck. She is built over computer faired mould shapes set up on a...

This is a modern ‘sit-on’ type kayak where the cockpits are essentially open and sealed from the remainder of the kayak. The areas around the cockpits are used for both storage and buoyancy.Construction uses 3 or 4mm plywood throughout and the stitch...

Like her bigger sister, the 12’ 6” Esk is a development of our Dart design. She has the swept up bow and flared out forward sections to help her in choppy waters—and we have retained the knife edge to the rear sections to give her good...

The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8' (1220x2440 mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes. It is an excellent first time father...

The photo above is of a Piragua built by Bob Taylor down in Texas. Piragua is a very simple useful boat. I probably get more Piragua photos than of any other boat, an indication that more Piraguas get built. Piragua is made from two sheets of 1/4"...

The Foldak is constructed from a lightweight wooden keel assembly, a pair of drop down plywood floors and four hinged laminated hoops. The structure is then covered with PVC cloth. The edges of the cloth are protected by wooden strips.The Woodenwidget...

Imresboat is a slimmed up version of Larsboat which was designed for Lars Hasselgren to replace a Folboat that had finally met its end. Lars wanted capacity for two, plus decking, as with his old Folboat. But Imre wanted something more slender and...

The 17’ Esk is a development of our 2 other Esk designs. She has the same swept up bow and flared out the forward sections to help her in choppy waters and her additional length gives her more storage space and a good ride in choppy waters. She...

KAYAK specifications: OAL: 95 inches Max Width: 30 inches Height: 15 inches (12" option) Weight: 40 pounds Max load = 250 pounds Draw: 4", with average weight operator Well, I have completed yet another boat...