The Cegall has been designed for Chippendale Craft and is very much based upon the 14' Kingfisher design. The method of construction is just the same with a pre-shaped ply centre girder forming the centreboard case and stem - this is epoxied to the narrow flat centre hull panel to form a very strong 'T' girder onto which the ply frames and transom are fixed. Following the finishing of the basic ply framework, the pre-shaped ply hull panels are fitted and the chines finished with epoxy.
|
Cegall 11' Particulars |
||
| LOA | 11' | 3.36m |
| Beam | 5'2" | 1.57m |
| Hull Mid Depth | 1'8" | 0.5m |
| Draft | 7"/3'1" | 0.17/0.94m |
| Sail Area | 71 sq.m | 6.6 sq.m |
| Approx. Dry Weight | 150lbs | 68kg |
| Hull Shape | Multi-chine with 4 planks per side | |
| Construction Method | Stitch and tape | |
| Major plywood requirements for hull | 7 sheets of 6mm + 1 sheet of 9mm plywood | |
| Guidance Use | 3 adults | |
| Drawing/Design Package | 4 x A1 drawings + 8 x A4 instruction sheets | |
