Power 14 Plans

Write a Review
Printed plans shipped and PDF plans emailed from Selway Fisher


The hull for this launch was originally based on our Power 16 model but instead of going for a simple flat bottom panel, we have used a 'V' bottom shape. Whilst this makes construction time a little longer it gives a slightly better ride in choppy conditions. The plans give details for both simple stitch and tape and ply on frame construction.

She has a large open cockpit with plenty of locker space. Forward is an optional cuddy. 11 sheets of 6mm ply plus a further sheet of 9mm are used for the hull construction and 2 sheets of 6mm ply are used for the optional cuddy.


Power 14 Particulars

LOA 14'6" 4.42m
Beam 5'6" & 6'6" 1.67m and 1.98m
Hull Mid Depth 2'7" 0.79m
Draft 9 1/2" 0.24m
Approx. Dry Weight 375 lbs (open version)
475 lbs (cuddy version)
170 kg
215 kg
Engine Up to 35 hp for general all round use
Speed 18 knots with 20hp
Hull Shape U shape with 3 planks per side
Construction Methods Stitch and tape and ply over frame
Major plywood requirements for hull 11 x 6mm sheets (+ 2 sheets for the cuddy)
1 x 9mm sheet
Guidance Use Up to 4-5 adults estuary/coastal
Drawing/Design Package 4 x A1 drawings + 6 x A4 instruction/spec sheets
Additions and alterations included with the plans Panel and frame shapes for 6'6" (1.98m) version.
View AllClose

0 Reviews

View AllClose