12'9" Waterboy Open Canoe Plans
- SKU:
- SEL-12WATERBOYOPENCANOE
- Availability:
- Printed plans shipped from and PDF plans emailed from Selway Fisher
Description
This canoe is based upon our Waterman 13 which has been given a larger capacity by introducing tumblehome into the topsides and giving her a little more depthâ(14â/0.355m) - this makes her excellent for carrying larger loads on a short length and for open canoe sailing. She has 5 planks per side giving her a well rounded and attractive shape.
|
12'9" Waterboy Particulars |
||
| LOA | 12'9" | 3.88m |
| Beam | 3'3" | 1.01m |
| Hull Mid Depth | 14" | 0.36m |
| Approx. Dry Weight | 55lbs | 25kg |
| Approx. Capacity | 775lbs | 351kg |
|
Hull Shape |
Narrow flat bottom plank plus 4 planks per side with tumblehome in the topsides | |
| Construction Method | Stitch and tape | |
| Plywood Requirements | 4 - 4 1/2 sheets of 4,5 or 6mm | |
| Guidance Use | General purpose - high carrying capacity | |
| Drawing/Design Package | 3 x A1 drawings + 5 A4 instruction sheets | |
Related Products
10' Waterboy Plans
$61.00
This a smaller version of our popular 12’9” Waterboy. The design has the same high volume hull with tumblehome and 4 planks per side with a narrow flat bottom as it’s bigger brother. Construction is...
11' Kate Open Canoe Plans
$61.00
Kate is similar in length to Little Kate but has a midship section which approaches that of the Christine (so you could look upon her as a shorter version of Christine). Kate has 5 planks per side...
6' Baby Kate Open Canoe Plans
$61.00
The Baby Kate is a mini development of our Kate series of open canoes - it is meant as a toy and not serious use with a child and can be built from a single sheet of 3 or 4mm plywood.
13'6" Big Kate Open Canoe Plans
$61.00
The Little Kate has been a very popular design for those wanting a lightweight, easily portaged single canoe. I have been asked to use the lines of the original 27" beam version and extend it by 2'...
Woodland 15 Open Sailing Canoe Plans
$68.00
This is a clinker/ply open canoe with graceful lines. We have given the hull shape a fairly fine entry so that she glides on the water and also a good waterline beam to allow her to carry a...
DW6 Racing Canoe Plans
$68.00
This open canoe has been designed as a simple low cost solution to taking part competitively in the Devizes Westminster race. The hull has an asymmetric shape with a narrow entrance angle to the...
IC10 International Canoe Plans
$270.00
The IC10 - a ply stitch and tape "B" Class International Canoe for Mr. Peter Rhodes-Dimmer - the first hull has been constructed by Alan Powell. The major idea behind this design was to produce an...
Eureka Canoe Plans PDF
$75.00
If you prefer printed plans click HERE
A kit for this boat is available from JO Woodworks.
Simple to Build