Dinghies

The Inishmore is one of a number of strip planked designs that we have enabling the builder to finish up with a beautiful round bilged craft of light weight. The Inishmore is a lovely strip planked dinghy which was initially based upon our Highlander...

I have often been asked whether we had a traditional Thames or Oxbridge type punt in our design catalogue - now and American client has asked us to draw up a 20' (6.01m) example for simple stitch and tape construction. She has a beam of 3'10" (1.17m)...

The Medway Doble was drawn up for Mr. John Lidstone who, having already built one of our Highlander dayboats, wanted a lightweight, car toppable craft of double ended shape suitable for river and estuary rowing and sailing. She has plenty of room for a...

The original 14' Skylark was drawn up as a simple extension of the Skylark 12 using the same rig and simple fit-out details as the 12. We then remodelled the hull with an additional chine to give the Mark 2 version. This version uses the same hull shape...

The Adirondack Guide boats were used in the outback of North America in the 19th and early 20th Centuries for hunting, portaging etc and have a very distinctive shape with fairly pinched bow/stern sections and slack bilge shape. Beam was kept low so...

A simple ply Grand Banks Dory for stitch and tape construction using just 3 sheets of 6mm plywood - she may have stowage/buoyancy compartments in the ends and could take an electric outboard motor. 10 Grand Banks Dory Particulars LOA 10' 3...

The Medway 11 is a rowing skiff development of our Medway Doble design. We have retained the same 3 plywood planks per side and the simple stitch and tape method of construction. She uses just 3 sheets of 5 or 6mmplywood. As drawn, she is fitted out for...

14’7’’x 3’9’’ (ex. gunwale). Approx. weight excl. gear 90 lbs. A skiff for rowing, sailing, paddling and punting. Built from pre-shaped ply panels in two halves for ease in car topping and carrying. Designed for fun, exercise and pic-nics on...

Kestral is a beautiful 15' Peapod type craft with four planks per side. The drawings give the plank shapes for simple stitch and epoxy construction but she could either be strip planked or built using the clinker ply method. She would make a very...

The Hawke Bay 20 shares the same features as the 22’ except that she is 2’ shorter and the drawings are for construction in stitch and tape plywood. She is a high volume skiff for offshore rowing in heavy seas. Despite her high buoyancy and storage...

The original Melonseed skiffs were gunning boats for hunting around the New Jersey area of North America. Unlike some of the other gunning skiffs and sneak boxes which were definitely inland boats, the Melonseeds were for use in more open and estuary...

A strip planked skiff for Mr. P. Hobbs with a simple lug rig - the hull is based on a traditional Thames skiff with it's slender and graceful shape ending in an attractive "wineglass" transom. She has a centreboard arrangement and plenty of room inside...