Open Powerboats

An American client wanted to produce a replica of the African Queen and saw our Ijssel launch as offering a craft of similar style - so we increased her length to 30' and beam to 8' (later we were asked to increase the beam still further to 10' and this...

Specifications:Assembled: OAL = 8' OAW = 36" OAH = 16" Nested: OAL = 48" OAW = 36" OAH = 24"Total Weight about 50 PoundsCapacity = 250 pounds max. (Including motor & battery)Maximum motor size = 2-1/2 HPHull Speed = 4 mphAbove: sample pages...

The 16' Bourne runabout is partly based on the Egret but with a forward raking transom and a fair amount of tumblehome in the aft quarters. She uses the same ply skin over a slotted together ply framework but the tumblehome area is planked using diagonal...

This is a strip planked version of our plywood motor canoes—because she is strip planked over computer generated moulds, the spacing between the moulds can be altered to give any length between 12’ and 16’. Apart from using an outboard motor...

BRUCESBOAT, POWER SKIFF, 19' X 5', 250 POUNDS EMPTY Bruce was looking for a large powered canoe but couldn't find one for sale. He said they still make them by hand in Maine but he was in California and you couldn't expect to buy one anyway unless you...

I was asked to take the 15'€™ (4.58m) Outboard Motor Canoe design extend it to 18' and also add 2" (50mm) to the hull depth. This new design uses the same basic hull shape with it’s narrow flat bottom panel with 3 further panels added each side...

For the Windsor slipper launch we have used the ply over frame method of construction using a modern framework of ply bulkheads and frames partly linked by fore and aft ply girders all set up to make sure that the builder starts with an accurate base...

The AQUA SPORT CRUISER was specifically designed for 2 purposes. First, when nested, it had to fit in the trunk of most cars, and second, it had to be capable of accepting a smal outboard motor for power, anything under 2.5hp. It also had to be...

Dani Jay is the chosen name of the project I called Bobsboat in last year's essays. The idea behind it was to have an easily driven seaworthy launch that would take a bunch of adults around in a laid back style. It was not to be a planing boat so big...

This was an interesting way to start a design. The client had a couple of Super Snipe engines kicking about and he wanted to sell them. What better way to do it and to get the greatest return for his money than to package them. The package that we chose...

  Click HERE for free Sponson Plans - Click HERE to learn more TOTER-2 Specifications: Length: 99 inches Max Width: 36 inches Width at chine: 28 inches Height: 13 inches Weight: 65 pounds Max load = 400 pounds Draft: 3" - paddle 4" -...

Free Zipper study plans HERE Full size templates for this boat are available HERE *Full size templates are in .pdf format. They need to be printed on a plan printing machine. Most cities have plan printing shops that can do this for you,...