Jerome Delaunay

A classical motor launch based on a simple plywood epoxy semi-dory hull. Rear self-draining cockpit, a central siting place with protecting coamings, and a forward locker with a hatch. The shape of the bottom is given by a central backbone where the...

14 foot simple cruising sailboat for two overnight or three for a day cruise, design for protected or inlands waters.A classic design pocket sailboat with 2 berths and a small cockpit.11 sheets of ACX 3/8" plywood.I recommend using epoxy, without glass...

For metric plans, click HEREFor imperial plans, click HERE 14 foot simple camper sailboat for two, designed for protected or inlands waters. A very simple boat to build with basic tools and material, all plywood parts have the same thickness. I...

A pocket cruiser catamaran for two to four, with flat bottoms inspired by the genius Berque’s twin M5. Stich and glue building on light frames and bulkheads. A large rear beam and a mast float should help in case of capsize. Each hull has a large...

Yakyak 425 "Sport" Supplement (optional)(NOTE: You also need the Yakyak 425 plans to build the boat) Floats, beam, rudder and larger sail option. 1 sheets of 1/6 or 1/5 ACX plywood. Yakyak 425 Sport Sail area 35 Sq.Ft

Pirogue 460 / 15’   15' x 7.5' &€“ 130 Lbs. Sail area 5.15 m² / 56 Sq.Ft.   This project start has a request from a college teacher to create an outrigger canoe for teenagers, based on the local traditional boats of Mayotte...

A larger modular Naut with choice of rig, junk ketch or schooner, and roof shape. 19 feet sailboat for four overnight, for coastal waters. Ballasted dagger board with lead, and an inside ferrociment ballast, huge lounge cabin. Two chines hull...

A classical cabin motor launch based on a simple plywood epoxy semi-dory hull. Rear self-draining cockpit and a shelter cabin. The shape of the bottom is given by a central backbone where the frames are fitted together. 10 sheets of ACX 3/8...

Two boats on the same basis: a junk-rig pocket cruiser and a more traditional cutter. 15 foot sailboat for three overnight, designed for protected, inland, and coastal waters. A more complex design with a two chine hull and a flat bottom...

15 foot simple cruising sailboat for four, designed for protected or inlands waters. I started this design in 2010, and it became my own “Norwegian Wood” - a Little yacht that I use mainly on the local lake. This one is a much larger boat...

YakYak 425 A sailing Sit On Top kayak for two. Plywood epoxy building on a central backbone and light frames. 4 sheets of 1/4 ACX plywood. The plans detail all the parts and panels dimension, the parts nesting on plywood sheets, two rigs, a complete...

Naut395  Metric LOA 3.95 m – 13‘ Beam 1.68 m – 5.5‘ Sail Area 5.7 / 8 m² - 62 / 86 Sq.Ft A bigger Naut 350 for two. A fast planning hull with Imoca lines 9 sheets of ACX 6 mm, 1/4 plywood. Simple stitch & tape...