Cabin Powerboats

Jiffy 22 The Jiffy 22 was first described in articles in National Fisherman, in November and December, 1993. I first designed the Jiffy 9-7 for a friend to use as a tender for his sailboat. I wondered about a new building method - why not build...

Jiffy V-22 The Jiffy V-22 is the result of the many requests I have had from builders who liked the character and appearance of the Jiffy 22, but who needed a soft riding hull for more exposed waters. Construction follows the same girder method that I...

Jack Tar Length over all: 26’ 1 ¾” || Waterline length: 24’ 2 ¾” ||  Beam: 9’ 3”.Draft: 3’ 0” || Displacement: 6,000 pounds. This lobsterboat design began with a commission...

Bay Pilot 18 Length over all: 18’ 0” || Waterline length: 16’ 0” || Beam: 7’ 3”.Draft, motor up: 0’ 8” || Weight, including motor: 1,825 pounds. The Bay Pilot 18 is a smaller boat with very much the same...

Wedge Point 31 Specifications LOA: 30’11” LWL: 30’ 5” Beam: 8’6” Draft: 22” (keel) Displacement: 7600 lbs Cruising Speed: 12.5 knots Maximum Speed: 15.5 knots (with...

LOA - 27' 6"     LWL - 27' 0"   BEAM - 8'     DRAFT - 24" DISPLACEMENT - 4,000 POUNDS POWER - 25hp    SAIL AREA - 113 Sq. Ft. CRUISING SPEED - 10 KNOTS This boat is related to my 15 year old design Yellow...

LOA - 26'    LWL - 23' 8"  DRAFT - 12"   BEAM - 8' 6" DISPLACEMENT - 3,600 POUNDS POWER - 90hp outboard CRUISING SPEED - 20 Knots   TOP SPEED - 25 Knots   The Berry Point 26 was designed to fulfill a need for a...

LOA = 20'0” LWL = 20'0” Beam = 8'0” Draft = 16” fully loaded Power = 9.9 HP outboard Speed = 4-5 knots Construction, plywood on bulkheads. Full size patterns to be printed on mylar or paper 36" x 48" To be successful a Shanty...

Length 2100mm ( 6`10 3/4” )Beam 1228 ( 4`1/4” ) Kompship is a ship for children's water games. The best motor are the legs or a wooden stick, but the ship can also be driven carefully with an trolling motor or with a small outboard...

The Clyde 18 is a modified Power 1.3 Mk 1 design. The hull shape is a simple deadrise type, single chine 'V' bottomed. The hull is parallel sectioned aft of the wheelhouse which means that she can be easily lengthened or shortened. Construction is for...

Below are photos of Tim Thedon's Jarvis 21 under construction.               21' Jarvis Particulars LOA 21'4" 6.52m Beam (excl. gunwale rubbers) 7'9"" 2.35m Hull Mid Depth 3'4" 1...

This story of Andalusia is not a how-to-build story in the usual sense. I am not going to tell you hovi to bruise your nearest thumb with the nearest hammer. Rather, this is a story for those who believe in the importance of noodling a new thing just for...