Dayboats

We were asked by a Portuguese client to stretch our standard Medway Doble to produce an easily rowed craft which could be carried under the bridge deck of a large cruising catamaran and used both as a tender and as a lifeboat. This version has the same...

A 23’3” Ship’s Boat for Mr. Ian Bloomfield - this is a strip planked version of a 17th/18th Century Frigate’s Boat - she is modelled on the bluff bowed craft used for general work in the Fleet and will have a carronade with it's...

We were asked to develop the plank shapes for a replica of a 4 oared Faering from some lines that had been taken off the boat some while back. The client was the husband of the Great Granddaughter of the owner who had the original built in 1892 for the...

Snipa's (pronounced Sneepa) are traditional clinker Nordic Fishing boats with a reputation for excellent sea keeping qualities and stability. Construction is fairly traditional but uses ply for the clinker planking over laminated frames. Below the...

At long last here is a larger addition to our Northumbrian Coble range—at 15’ LOD, she is a big handsome dayboat with space to accommodate the family plus camping gear and stores. The drawings give details for an outboard well and copious...

The Pipit has been modeled on the old Hampton type "Flattie" which has a flat bottom over most of it's length running into a moderate "V" aft towards the transom. The bottom also has a reasonable amount of rocker fore and aft and this combination with...

We have had many requests for a longer version of our Fisher Swampscott 12 dinghy/dory, so here she is. At 16’ we have designed her to be considerably heavier than her smaller sister, although she could, if the builder wishes, be constructed in the...

This interesting craft is based upon the 'V' bottomed skiffs which were used on the Atlantic Coast side of the Virginian Eastern shore for tonging and crabbing. These boats were distinctive, with their well flared sides, beamy hull and well raked...

This large daysailer may be built in 2 versions - a fixed keel motorboat with either an inboard engine or outboard in a well, or a sailing version with fixed or lifting keel. Construction is for clinker/ply over computer generated moulds which could also...

We designed the 16’ Stornoway for Walt Scherf and having built that boat, he asked me to draw up an 18’ fast dayboat based partly on the Stornoway model but with lower sleeker lines. What has evolved is a hull with 6 planks per side and a very...

The Black Swan is a stretched version of the White Swan for Dr. Carcereri of Verona who wanted good headroom in a small traditional gaff cutter. In fact she has just over 6' in the galley area and an accommodation that can be altered to suit your own...

The Lillie Canoe Yawl - this lovely craft was commissioned by Tom Dunderdale after reading the series of articles in the Classic Boat magazine on the 13' strip planked canoe yawl Ethel. The idea was to produce a canoe yawl of similar style to those of...